The E115 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.

• High output, professional quality sound with E115 – 500 W continuous power
• E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
• E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
• - For PLD/CXD visit Amplifier Navigator Software
• - For GXD visit the GXD Firmware Updater
• Titanium diaphragm for high fidelity and long life
• Rugged tour-grade textured paint
• Foam-lined perforated steel grill
• Available U-Style Yoke and M8 rigging kit for permanent installation
• Dual angle pole socket

1 Power that the device can withstand for two hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%, using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30 Hz 12 dB/oct.
2 With QSC Processing

*Specifications are subject to change without notice.