Pro Audio / 錄音器材 / 零售批發 / Shure 產品 (香港及澳門) 代理商 / Harman 產品 (香港及澳門) 代理商: JBL 及 Crown
The Avantone “Cabernet (C-series)” mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The Avantone CK-1 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET micsbut at a fraction of their cost!
Our rugged CK-1 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly.
The CK-1 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents our commitment to quality as these normally are the type of “upgrade” components that are implemented by microphone modder/hot-rodders!
The high quality FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the CK-1 for instrumental and percussion mikingIt exudes class visually as well as sonically. The CK-1 is equally at home on the stage for drum overheads, acoustic instruments and piano.
The CK-1 includes (3) 19mm (3/4″) interchangeable capsules to provide unlimited miking possibilities! Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The rugged CK-1 mic is able to produce professional results with a clean sonic character.
The included SSM Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 3 capsules (cardioid, omni, and Hyper-cardioid) offer versatility for accommodating virtually any miking task.
The CK-1 has separate -10 dB pad & 80 Hz LF roll off switches….The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track.
Uses IncludeCymbals, Hi-Hats, acoustic guitar, drum overheads, piano, percussion etc
Standard Items Included
Polar Pattern(s)Cardioid , Hyper-Cardioid & Omni Capsules included
Frequency Response25-20,000 Hz +/- 3dB
Output Impedance<=200 Ohms
Maximum SPL138dB (0.5% THD @1000Hz)
S/N Ratio1Pa 78dB
Noise Floor< 17 dBA
Output ConnectorMale XLR 3-pin
Included Accessories-3 Capsules-Padded Wooden Box-SSM Shockmount
High-Pass Switch80 Hz 6dB/octave
Attenuation Switch-10 dB
Power RequirementsStandard 48 Volt Phantom / 5mA
Dimensions(23mm) x (153mm)
FinishPolished Nickel trim / Metallic Cabernet Red Body
Since 2004, MIC18 has been selling professional audio products in Hong Kong.
Professional audio shop in Hong Kong.
產品包括: 錄音器材 / 拍攝收音 / PA 系統
服務對象: 個人零售 / 音響出租公司 / Event 公司 / 批發業務
服務地區: 香港及澳門 | We serve in Hong Kong & Macau
Shure 產品 (香港/澳門) 代理商
Harman 產品 (香港/澳門) 代理商: JBL / Crown
Room 10, 7th Floor, Vanta Industrial Centre,21-33 Tai Lin Pai Road,Kwai Hing, NT, Hong Kong
0930 - 7pm
0930 to 5pm
Sunday / PB